Developing, manufacturing and installing GRP and thermoplastic products - GPE Industries Limited, County Donegal, IrelandDeveloping, manufacturing and installing GRP and thermoplastic products - GPE Industries Limited, County Donegal, Ireland
 
 

Fabrication

Here are some examples of the thermoplastic fabrication projects undertaken by GPE Industries Ltd.
2.2m Diameter Exhaust Ducting
Ducting Exhaust Station

 Fume Extraction - Ventilation Ducting Systems

Diameters 100 to 3000mm. Vacuum and pressures as required. Rectangular ducting in sizes as required. Plenums and hoods as required. Full complementary range of fittings available including single and multi-blade volume control dampers, manual or motorised, and blastgate dampers. All systems to Class 1 Flame spread per ASTM E84. Auto Computer Aided Design (CAD) general arrangement, detailed, isometric shop assembly and site installation drawings a speciality. Site attendance and site joint assembly by experienced moulding crews.

 Air Pollution And Odour Abatement Systems

Components and systems from single item supply to complete greenfield turnkey projects in conjunction with our associate companies AIR - Cure Ceilcote GmbH, with GRP fabrication by GPE. The range includes Wet scrubbers and systems, lonising wet scrubbers, Gas absorption towers, Cooling/condensing towers, Quenches, Tri Mode scrubbers, Wet cyclone scrubbers, Venturi (Rod and long throat) scrubbers, Venturi (Variable and Eductor) scrubbers, Axial and roof ventilator fans capacity range 1,400 to 180,000 ACMH, Centrifugal fans capacity range 4,000 to 250,000 ACMH at static pressures up to 635mm wg., Mist eliminators, Tower packing and internals.
10 cub. metre in situ moulded Tank
90,000 cmh Rectangular Scrubber

 Vessels, Tanks, Scrubbers, Columns, Towers

Diameters from 500 to 5,000mm. Volumes from 100 to 100,000 litres. Rectangular sizes as required. Complete range of external and internal accessories: ladders, cages, guard-rails, flooring and decking in treated steel or GRP; baffles, packing, support rings, support grids, spray headers, spray nozzles, demisters, in GRP and thermoplastics. Thermoforming production facilities for dished end closures and radiused corners in Dual Laminate equipment.

 Process And Effluent Piping

Diameters 25 to 1,000mm; larger diameters as required: Positive and negative pressures up to 10 bar g. and full vacuum.
2 x 30 cub. m Dual Laminate Tanks
Full complementary range fittings. Full stock of standard mandrels and fitting moulds.
9.0 Diameter Dish Lid


 Speciality Mouldings

Single or multiple customised mouldings to requirements; reactors; instrument and motor housings; drains; plastic thermoforming; spray mouldings; linings.

Contact us to discuss your fabrication requirements.